IMS2020 (Virtual Edition) will feature MilliBox live demos.
For more info [email protected]
#ims2020, #5gnr #radar #RF
In the current context, we want to help our fellow small businesses in mmWave industry. We decided to apply a discount 5% and up for all small businesses, minority owned businesses or academics on all our product line for new orders starting July 2020.
The price model of most mmWave test equipment manufacturers in the industry is making it so much harder for little guys to get a fair chance at the innovation spree surrounding 5GNR and mmWave radar, forcing them to settle for subpar DIY resource draining catastrophes. That’s always been our battle, but now we want to do even more and support small emerging mmWave innovators just like us.
OTA test of mmWave antenna should not cost more than a microwave setup, we demonstrated, it should cost less!
Your antenna array test budget now goes farther than you thought, contact [email protected] today.
#mmwave #5gnr #RF #radar
MilliBox will be present in Paris at the European Microwave Week from October 1st to October 3rd 2019. We will demonstrate our latest version of our MilliBox antenna radiation pattern test system in Booth 685. For more information contact [email protected]
Milliwave Silicon Solutions Inc. is pleased to announce that it entered a representation agreement with QuantumFlow for Southern California and Arizona for its MilliBox product line. MilliBox is the first affordable, compact and modular OTA radiation pattern test tool designed by and for mmWave engineers. Jeanmarc Laurent the inventor of MilliBox said: “Rafael, Sergio and the QuantumFlow team have a dedication for customer service and a presence in the fast expanding SoCal mmWave market that really fits the MilliBox vision. We have seen a strong demand for MilliBox in this region and QuantumFlow will help us develop this market further”. On his side Rafael Ferrera stated: “More and more RF designers are transitioning from Microwave to mmWave in our region and MilliBox is the right product at the right price to sustain this momentum. MilliBox is a great compliment to our linecard and existing product offering.” For more information contact Milliwave at [email protected] or go to www.millibox.org For more information about QuantumFlow contact [email protected] or go to www.quantumflow.co
Friday 13th 2018 San Jose CA
At Milliwave Silicon Solutions, we are witnessing first-hand the fast pace development of a multitude of new millimeter-wave (mmWave) solutions addressing three main market pulls: ACC (77GHz), 802.11ad and 802.11ay at 60GHz, and of course 5G (NR) mmWave. These solutions, due to the nature of mmWave propagation, rely heavily on the quality of their beamforming capability at the algorithm, RF, and antenna level.
Traditional anechoic chamber setups for microwave radiation pattern measurement, even when adjusted specifically for mmWave, have some critical shortfalls:
1) Form factor
There are two obvious conflicting forces for defining the correct size of radiation pattern test fixtures.
a) Large chambers are desirable because measurements should be done in the far field. For mmWave, far field may not be as far as one might think. For example, a 6cm array at 28GHz would be in the far field at about 60cm distance and standard chambers are often oversized.
b) Small chambers are desirable because they help to resolve two issues: cable length and the number of chambers that can fit in a given lab space. The cable loss is high at mmWave, and shorter cables give the best signal integrity. The number of chambers in the lab directly impacts the time to market. In mmWave, unlike for most RF design and due to the importance of beamforming performance, multiple teams of engineers from SW to baseband to RF to antenna will compete for access to the chamber to adjust their designs, and some of the tests may take hundreds of hours to complete.
Having one big chamber is not practical and can slow the engineering progress. Instead, our approach has been to have mini-chambers which fit on a single lab bench and still leave space for engineers to place their laptop and equipment. After years of experimentation, we narrowed it down to 2’ x2’ x 4’ as the most versatile chamber size for mmWave. On top of it we created a solution which can be extended by adding 2’ sections such that in certain cases a 2’ x 2’ x (6’ or 8’) can be created starting from the same original 4’ fixture.
Ultimately the best mmWave lab configuration contains a number of benches with chambers on them.
2) Metal frame
For so many years of radio development, RF test chambers were made as a big metal box lined with anechoic absorbers. Some are made as a copper mesh Faraday cage. In our experience, those do not translate to the mmWave measurement requirement. In a mmWave environment, metal is not a friend when developing high-gain phased arrays. When we started over-the-air (OTA) measurements over 10 years ago, we slowly eliminated metal from the radiation pattern test chamber. Instead we used wood, PVC, and PLA for the frame and nylon screws for the entire assembly. Now in our chambers we have less than 1% metal (the motors) and everything else is either wood or plastic. Our philosophy came from the observation that we are not as susceptible to noise from the outside as we are to multipath inside the box. To further eliminate reflections the inside on the chamber is padded with 4” thick, corrugated absorbers that are specially loaded at mmWave. They provide about 50dB attenuation across the mmWave bands. This is enough to confine the signal inside and avoid interference from another chamber nearby.
Cost here takes into account a number of factors.
a) Our solution’s price tag is only a tiny fraction of what other test equipment makers charge for an equivalent application. This is important because everybody has a given budget to spend on test equipment. What we have learned the hard way is that for mmWave development, to some degree, the more chambers you have the faster the beamforming solution will come true. One chamber is never enough and if the entire budget has to be allocated to it, then the entire effort will be throttled down when engineers form a line trying to get to it. This happens over and over in our experience with new mmWave teams, and this is due to the microwave legacy when one chamber for a whole team is usually enough. That’s because the beam forming effort is often underestimated and it is overlooked that this effort will involve multiple teams who traditionally did not need chamber access or only sporadically. In our experience planning on three chambers is a reasonable assumption for a team of 15 to 20 engineers.
b) Cost is also the fact that lab space can be expensive, back to form factor, and the fact that aluminum and copper are so much more expensive than wood and PVC in our solution.
c) Finally the last aspect impacting cost is the cost of maintenance, the cost of downtime, and the cost of customization. Our solution is made 100% from standard parts. The only parts we buy for our solution are available off the shelf online. All other parts that are specific to our solution are made by us. We can replace any part of our design in a few days and get you back on-track. On top of this the entire solution is self-maintainable and anybody who can assemble an IKEA shelf can entirely take apart and rebuild our complete fixture in a few hours with our included instructions. Obviously the robustness and reliability of our solution is the first line of defense, but in our opinion there is no repair service, 24/7 hotline or maintenance plan that can beat the ability to quickly and easily fix things on one’s own and if necessary, get a replacement part shipped overnight.
4) Cable length and wiring
Another factor completely overlooked that we are seeing on daily basis, whether RF engineers build or buy radiation pattern chambers for mmWave, is the importance of cable routing capability and wiring flexibility. After years of tangling wires ourselves, we finally came up with a unique solution to get any wire, coax, or ribbon from the DUT to the test or control instrument without a passthrough connector and without tangling the wires when the DUT rotates. Additionally, our solution reduces the cable length to the minimal needed, 50cm to 1m is enough in most setups. This has many implications in the ease of use of the system, lower cost of cables and connectors, and improved signal integrity. A bad approach to wiring can ruin a chamber solution which looked great on paper. The motor control is achieved using a daisy-chained, single 3-wire bus (12V, G, D) going to a power supply and a USB dongle. That’s all there is to it and that’s enough.
Through the years we have spent working on mmWave designs, we know that plans change and needs evolve. It is often a limiting factor when solutions are either too custom for a particular application or just a standard build with no flexibility at all. What differentiates our solution is that it is modular at every level.
a) Flexible with tools vendors:
Our solution is not tied to any specific instrument vendor. As long as they support GPIB that’s all we need.
b) Software/OS agnostic:
The motor control is done through a USB to serial dongle with open source high level APIs for Python, MATLAB, Labview, C, etc. The motors are extremely popular in small robotics and are very well documented online and heavily crowd-supported with open-source GPL2 license. We include the entire Python sample code for it, but if one wanted to integrate within a larger framework or use specific postprocessing tools and application, it could be done. Ultimately, the fixture dumps out a .csv data file with coordinates and matching captured value. From there, many types of rendering (3D, heatmap, etc.) and post-processing can be done for to suit one’s needs. We have our own favorites, but we let the user decide for himself.
c) Flexible framing
The chamber frame itself is made of a set of parts which can all be assembled to one another and reorganized indefinitely. The door position and axis can be changed to fit the lab usage or accommodate the user. New sections can be purchased to extend the length or the height. Feet extensions can also be purchase to create a shelf for the instruments below the chamber deck and save bench space.
d) Accommodate DUT form factor
Our solution comes standard with a generic platform where the DUT is bolted onto. This platform can accommodate small and large DUTs up to 200mm x 160mm x 160mm. The platform has 20 mounting holes and 4 cable routing options which can satisfy most designs whether dipoles, patches or mixed antenna arrays. As the rest of the design, if one wanted a particular DUT mounting which cannot be handled by the standard platform, we can design and ship custom made platforms quickly.
6) Angle resolution
The resolution angle of a radiation pattern test chamber is often seen as an important criteria. What we have seen is that a 1-degree resolution for (-90 +90) x (-180 + 180) rotation in (elevation) x (azimuth) gives a full data set of 64800 data points in a single plot and this is more than enough. Our motors could be programmed to go down to 0.08 deg in elevation and 0.008 degree in azimuth, but this would clearly be an overkill, and also a huge waste of time. Three plot resolution options (quick scan at 10deg, full plot at 5deg, fine plot at 1deg) gives the right amount of balance between accuracy and time. Lastly, our solution comes with a built-in laser cross-hair pointer which is used to check and calibrate the nominal (0,0) center point visually.
Traditional microwave type test chambers do not address the needs of mmWave radiation pattern testing very well; they have a lot of shortfalls and are expensive and bulky. Instead, we always chose to build our own, as there was nothing else out there that met our needs, but this required a lot of engineering time. We had many iterations along the years, reworking them each generation, with new parts and vendors. Now our mmWave partners are asking us to help them do these test fixtures for them. At Milliwave Silicon Solutions, we believe we can really help the exploding mmWave marketplace by finally coming up with a simple affordable solution that addresses the needs for a vast majority of cases, by incorporating all the know-how we accumulated over the years doing it for ourselves and our partners.
Our Solution is called it MilliBox™ and it will be unveiled in January 2018.
For more information contact me at [email protected]
Milliwave Silicon Solutions is pleased to announced that it entered in representation agreement with representative company mmWave Test Solutions for its MilliBox product line for EMEA and India regions.
MilliBox is the first affordable, innovative, modular OTA mmWave radiation pattern chamber. Jeanmarc Laurent, inventor of MilliBox stated “I see a great momentum for MilliBox in Europe and India as mmWave designs are expanding rapidly in markets like 5G, 77GHz and 60Ghz spectrums. I am really excited that the team from mmWave Test Solutions are going to participate in the acceleration of mmWave innovations by offering MilliBox products in those regions. Making radiation pattern test tools accessible to a wider audience is critical for mmWave success. Milliwave’s vision of one engineer – one MilliBox is key to mmWave design time to market acceleration.”
MilliBox will be demonstrated all week at IMS2018 in 5G pavilion Booth 1433 For product inquiries in EMEA and India, mmWave Test Solutions can be contacted at [email protected] Milliwave Silicon Solutions, inventors of Millibox, Inc can be contacted at [email protected] . MilliBox is a trademark of Milliwave Silicon Solutions, Inc.
12th June 12, 2018, Philadelphia
06/14/2018, Philadelphia, Milliwave Silicon Solutions and Centre for Intelligent Antenna and Radio Systems (CIARS) at University of Waterloo have entered into a strategic partnership around the MilliBox product line development.
MilliBox is the first affordable, innovative and modular OTA mmWave radiation pattern chamber. Chinh Doan, founder, and CEO of Milliwave Silicon Solutions, stated, “We are pleased to work with CIARS at the University of Waterloo, who has developed state-of-the-art mmWave antenna technologies and test capabilities. Their independent performance measurement of MilliBox will provide a valuable assessment to the fast expanding 18GHz to 95GHz spectrum marketplace.” Mohammad-Reza Nezhad-Ahmadi, Research Prof. at CIARS, UWaterloo, added, “We have been in contact with Milliwave Silicon Solutions since the early days of MilliBox. Now that we have our own MilliBox, we are helping Milliwave demonstrate it is a valuable tool for many mmWave designers.”
MilliBox is demonstrated all week at IMS2018 in the 5G Pavilion Booth 1433. For inquiry, please contact [email protected] MilliBox is a trademark of Milliwave Silicon Solutions, Inc.